Barrel-type bumpers have a long history of application and remain popular due to its simplicity, high performance and strength. They are produced in a wide range of sizes and interchangeable with old type barrel-type devices. FACING DEVICES They are extremely reliable and work in many ports around the world.

Features:

1. High performance;
2. Can support large panels sizes;
3. Прочная, проверенная конструкция
4. Large selection of operational characteristics.

Application area:

1. Bulk terminals
2. Oil and LNG terminals
3. Container terminals
4. Berths for vessels of the RO-RO type and cruise ships
5. Offshore platforms
6. Multifunctional berths

INSTALLATION:
Barrel breakers are used together with front panel. The front panel is made of steel and fastened to the bouncer.

Conical breakers represent third generation of optimal performance and effectiveness. The conical shape makes
the breaker is very stable even at large angles of compression and provides excellent shear strength.

Conical Breakers have a wide choice sizes and are due to a number of excellent performance.

Features:

1. High performance
2. Can support large panels sizes
3. The level of energy absorption remains unchanged at the corners application of compressive force up to 10° with respect to the axis of the fender
4. Large selection of standard sizes, choice of a constructive solution in accordance with the requirements client
5. Easy and quick installation. 

Application area:

1. Berths for general cargoes
2. Oil and LNG terminals
3. Container terminals
4. Berths for vessels such as RO-RO and cruise ships
5. Bulk terminals

INSTALLATION:
Conical Breakers used together with the frontal panel. Front panel is made of steel and is attached to breaker device. Panels UHMW-PE are lined.

Breakers are A new generation of arch breakers. They have a simple and sturdy construction and have a high degree of reliability with even in the harshest conditions operation.
Arched breakers (RUBBER FENDER) can be additionally equipped polyethylene (UHMW-PE) pads or steel frontal frames.

Features:

1. High shear resistance in longitudinal direction;
2. Durable, time-tested design;
3. Can be equipped with polyethylene (UHMW-PE) plates with low coefficient of friction or steel frontal frames;
4. Large selection of sizes, different Operating conditions. 

Application area:

1. Berths for general cargoes
2. Berths for vessels of the RO-RO type
3. Harbor for work boats
4. Moorings for barges and tugs

Rubber bumpers DO represent an improved generation of D series breakers and can be used in the most difficult conditions.

Features:

1. Monolithic construction
2. Durable, time-tested design
3. Easy installation

Application area:

1. Marinas and berths for small craft
2. Harbor for work boats
3. Berths for general cargoes
4. Internal waterways

Rubber bumpers ME are available in a wide range performance characteristics. They can be used in various combinations of length and direction for different operating conditions.

Features:

1. Highly effective geometry
2. Strength in longitudinal shear
3. Large selection of operational characteristics 

Application area:

1. Container terminals
2. Tanker berths
3. Berths for vessels of the RO-RO type and cruise ships
4. Portable terminals and berths for general cargo

Rubber bumpers ST have large contact surface, one end The bumper has a bevel. Can used in complex operational conditions.

Features:

1. Unique design
2. High resistance to wear
3. Easy installation

Application area:

1. Marinas and berths for small craft
2. Harbor for work boats
3. Berths for general cargoes
4. Internal waterways

Composite bumpers are made from rubber and ultra-high molecular weight polyethylene (UHMW-PE), which provides low friction and
resistance to wear. 

To connect the two materials are used special vulcanization technology that provides stronger and more reliable than mechanical fixation.

Features:

1. Large selection of standard sizes
2. Multi-colored surface UHMW-PE with low frictional force
3. Different types of installation
4. Elastic rubber base

Application area:

1. Marinas and berths for small boats
2. Mooring pontoons
3. Inland waterways
4. Guide piles for floating structures

Are rubber design, can be used as step, absorb the impact of ships and have a long service life. 

Features:

1. Unique design
2. Different lengths
3. Easy installation

Application area:

1. All types of berths, Pier

Цилиндрические отбойные устройства длительное время применяются во всем мире. <br /><br />Они имеют простую конструкцию, которая обеспечивает удобную установку. Благодаря силе реакции и поглощаемой энергии они идеально подходят для причалов, обслуживающих большие и малые суда. 

Широкий выбор типоразмеров позволяет точно подобрать цилиндрическое отбойное устройство для любых целей.

Features:

1. Поглощение энергии, низкое давление на корпус судна.
2. Простота установки и обслуживания.
3. Подходят при боковой и килевой качке причаливающих судов.
4. Установка по вертикали, горизонтали и диагонали.

ОБЛАСТЬ ПРИМЕНЕНИЯ:

1. Навалочные терминалы
2. Многофункциональные причалы
3. Причалы для судов типа РО-РО и паромов
4. Причалы для рыбацких и рабочих катеров
5. Понтоны и плавучие конструкции

W - shaped bumpers for tugs are designed for extreme operating conditions. Their unique design with "open channels" simplifies installation.

Because of the flexible supports, they are adjacent to the sides of various shapes.

Features:

1. Designed for very high loads
2. They have "open channels" that simplify installation
3. Grooves for increasing adhesion 

Application area:

1. Sea tugs
2. Icebreaking tugs
3. Tugboats for large harbors

M-shaped bumpers have elastic contact surface large area to reduce the pressure on the board pushed ship.
Grooves on the surface increase traction, and triple bearings provide a reliable attachment to the tug.

Features:

1. Suitable for heavy duty applications
   exploitation
2. Grooves for increasing adhesion

Application area:

1. Tugboats

Block demolition devices for tugs are designed for heavy conditions operation. Products with flat and undulating surface.
If you want to minimum frictional force, can be applied RUBBER FENDER device with a surface of UHMW-PE.

Features:

1. Designed for very high loads
2. Flat or wavy working surface

Application area:

1. Tugboats

Cylindrical bumpers for Tugboats have a wide choice sizes, so they can be curved according to required length.
They are used for protection of fore and aft casing the body of towed devices.

Features:

1. Simple and economical design
2. Strong, tested in practice design
3. Any length

Application area:

1. Tugboats
2.  Working steamships
3. Flat bottom barges

Are used in open corners, so that ships can safely maneuver at the berths and in narrow channels such as floodgates and dry docks.

Features:

1. Low rolling resistance
2. Low expenses for technical service
3. Used alone or blocks

Type A:

Wheel type bumpers type A are mounted on a fixed axis, which rests on a special frame that allows the bouncing devices to rotate around their axis.
Type B:

During the berthing of the vessel, wheel-type bumpers of type B can rotate with a 20% deflection, which allows them to absorb the impact energy. The mounting dimensions are the same as for type A.

Type C:

Wheel-type bumpers type C can rotate on three axes. Their elastic deformation is doubled. Together with this, the energy absorbed by them more than doubles.

Application area:

1. Entrances and walls of dry docks
2. Approach parts of the lock
3. Open angles

Extruded RUBBER FENDER devices are simple rubber profiles that are attached to the construction with bolts.
Extruded RUBBER FENDER can be practically unlimited length.

They are cut and drilled in accordance with their specific value.

Features:

1. Any size
2. Any length
3. Various ways of fastening
4. Black or gray

Application area:

1. Marinas and piers for small vessels
2. Tugboats and work boats
3. Protection of pontoons
4. Internal waterways
5. General purpose baffles

PNEUMATIC RUBBER FENDER Pneumatic bumpers are ideal suitable for regular use in ports and when the vessel approaches the ship.
Large PNEUMATIC RUBBER FENDER devices are equipped with chain networks for additional protection.

Features:

1. Ease and economy of movement
2. Low reaction, high energy absorption
3. Suitable for small and high tide areas
4. Easy installation

Application area:

1. Tankers
2. High-speed ferries and vessels with aluminum hull
3. Temporary and permanent installations
4. Rapid Response and Emergency Services

Floating outfitting devices have a rubber or polyurethane coating.
They are optimal during the berthing of the vessel to the ship at a large amplitude of the tide. <br /><br />Large decoy devices are equipped with chain networks for additional protection.

Features:

1. Does not sink construction
2. Low reaction, high energy absorption
3. Used in floating or submerged position
4. Easy installation

Application area:

1. Cruise liners
2. Container trucks
3. Bulk terminals
4. Berths for vessels of the RO-RO type and ferries
5. Tankers

Ring breakers are an effective solution for simple mooring rods, guiding and rotary structures. The floating breaker floats and sinks along one cylindrical pile and rotates freely around its axis, helping the direction of the vessel's movement. The inner housing is made of high-strength material with low frictional force and is designed for minimal maintenance. 

The foam of the ring breaker does not sink, is not torn and is not blown off. It is made of high-strength polyurethane with the use of nylon fibers. Ring breakers are produced for specific tasks. To increase the above-water contact surface, the bumping devices may have additional buoyancy. To improve visibility and improve safety, bright colors are often used.

Features:

1. Free spin on piles
2. Rise and fall together the water level
3. Quick installation
4. High performance
5. Low pressure on the board
6. Do not leave traces on the hull of the vessel

Options:

1. Buoyancy Tanks for Increasing the Height of the Bleeding Device
2. Differential tanks for adjusting the draft of the bump device
3. Various protective equipment for difficult operating conditions

Application area:

1. Corner protection
2. Rotary structures
3. Berths
4. Simple bump pallets
5. Protection of bridges

Plastic bumpers are an environmental protection system, replacing wooden bumpers. They are made of composite plastic, which allows them to withstand large shock loads. 

Plastic breakers are not subject to rotting, corrosion, destruction and do not pollute the environment. They are ideal for marine structures.    

Features:

1. Recycled material, not is damaged by pests
2. Are not subject to rotting, corrosion and destruction
3. Low coefficient of friction
4. Easy installation and maintenance
5. Unlimited length

Application area:

1. Protection of bridges
2. Walls and crane rails
3. Pile piles and systems
4. Guide walls and locks