Features:

1. A single-stage oil hose can be connected to one pipe system, a mooring system, or to other crude oil delivery devices, such as the adjacent float hose
2. Minimum remaining buoyancy 5%
3. Wired configuration available on request
4. Standard 15Bar-19Bar rated pressure one end enhanced semi-floating oil hose technical data

Features:

1. Main Pipe Hose for One-Frame Floating Pipeline
2. Minimum residual buoyancy 20%
3. Provide continuous conductivity as per standard
4. Standard data for the standard 15Bar-19Bar rated pressure floating oil hose

Features:

1. Single skeleton reduced diameter floating oil hose
2. It is possible to connect a larger diameter main line hose to a smaller diameter hose;
3. Minimum residual buoyancy 20 ％
4. Configure the conductive connection according to the standard;
5. Matching hoses that can be supplied with other hoses include: The diameter reduction can be done on the hose body (which can be on the reduced diameter steel pipe core), or on the larger inner diameter end of the end pipe joint, or the diameter reduction process can be integrated to complete the reduction, and the weight and size will be There are changes (changes).

Features:

1. Professional design to improve and improve single-frame floating oil hose. Oil transfer at the end of the tanker line
2. Minimum remaining buoyancy 20%
3. A standard isolation configuration is provided.
4. Standard data for the standard 15Bar-19Bar rated pressure floating oil hose

Features:

1. General medium oil tanker oil discharge flocking oil hose connecting single skeleton floating oil pipeline:
   
   <br />2. Minimum residual buoyancy of 20% (including the weight of the final attachment):
   
   <br />3. A standard isolation configuration is provided.
   
   <br />4. Professional design with higher softness and lower bending radius:
   
   <br />5. Standard data for the standard 15Bar-19Bar rated pressure floating oil hose

Features:

1. Single-cord pipelines are connected to rigid connections with single-point mooring systems or other oil transportation facilities. For example, an underwater connection with CALM: connection to an underwater PI-EM system.
2.  Standard Isolating Configuration
3. Standard data for the standard 15Bar-19Bar rated pressure floating oil hose

Features:

1. The single-frame oil hose line is connected to a single point mooring system hard pipe or to other oil conveying facilities. For example: underwater connection with CALM, connection with submarine PLEM system.
2. Complete rubber float ring to configure the outer float
3. Standard Isolating Configuration
4. Standard data for the standard 15Bar-19Bar rated pressure floating oil hose

Features:

1. Single chord underwater pipelines, does not require conductive connection
2. Standard non-conductive configuration
3. Standard data for the standard 15Bar-19Bar rated pressure floating oil hose

Features:

1. Single Cord Underwater Pipeline for Oil Hose with Floating Body
2. Complete rubber float ring to configure the outer float
3. Standard non-conductive configuration
4. Standard data for the standard 15Bar-19Bar rated pressure floating oil hose:
5. Note: The main line with the float ring hose has the same outer diameter as the hose without the float ring.

The hoses will be suitable for use with crude oil and liquid petroleum product,and an aromatic hydrocarbon content not greater than 50% by volume.Flow velocity of 21m/s.

Features:

1. Независимый пенный плавающий корпус, предотвращающий впитывание воды
2. Outer layer with excellent resistance of abrasion,UV, aging and corrosive environments
3. Easy installation and less maintenance. Reinforcement: high tensile strength fabrics with helix steel wire
4. Customized steel flange are available. Inner layer: NBR compound
5. Independent foam; Cover: CR; Ideal working temperature: -25 to 100C; Safety factor: 5:1
6. NOTE: working pressure 19bar & 21bar ,Other parameters are by your requirements.

Heavy duty suctionand discharge dock hose designed specifically for transferring petroleum products to and from tankers, barges, and storage tanks.

Features:

1. Exclusive construction allows for excellent flexibility.
2. Specially formulated tube is resistant up to 50% aromatics.
3. Rugged cover is resistant to oil,cuts, scuffs and ozone attack.
4. Inner layer: NBR compound synthetic rubber; Reinforcement: high tensile strength fabrics with helix steel wire;
   Cover: CR; Ideal working temperature: -25 to 100C;
5. Safety factor: 5:1
6. NOTE: working pressure 19bar & 21bar ,Other parameters are by your requirements.

Used for port, dock, discharge sea water, silt, sand, flood, etc. Particularly suited to the work of dredging construction for dock and port, Building Project and soon.

Features:

1. Inner layer: NR, BR and SBR compound Synthetic rubber;
2. Reinforcement: high tensile strength fabrics;
3. Independent foam;
4. Cover: NR+CR;
5. Ideal working temperature: -25 to 80C;
6. Safety factor: 4:1
7. NOTE: ID 900mm & 1200mm , Other parameters are by your requirements.

Used for port , dock, discharge seawater, silt, sand, flood, etc. Particularly suited to the work. Of dredging construction for dock and port, Building Project and so. The suction hose has good stiffness, can not be abnormal abrasion, the arch and eddy of some part place of inner rubber that is formed by the bend of the storm and tide.

Features:

1. Inner layer: NR. BR and SBR compound synthetic rubber;
2. Reinforcement: high tensile strength fabrics with helix steel wire;
3. Cover: NR+CR;
4. Ideal working temperature: -20 to 70C;
5. Safety factor: 5:1
6. NOTE: Other parameters are by your requirements.

Installed in between the pump and cutter of the dredger, suction the slurry. Suction hose & Armored hose with HB steel ring in, suitable for limestone, granite, coral and mineral etc.

Features:

1. Inner layer: NR, BR and SBR compound Synthetic rubber;
2. Reinforcement: high tensile strength fabrics with steel ring in;
3. Cover: NR+CR;
4. Ideal working temperature: -25 to 80C;
5. Safety factor: 3:1
6. NOTE: ID 900mm & 1200mm, Other parameters are by your requirements.

Armored hose with HB steel ring in suitable for limestone, granite, coral and mineral etc.

Features:

1. Inner layer: NPs. BR and SBR compound Synthetic rubber;
2. Reinforcement: high tensile strength fabrics with steel ring in;
3. Cover: NR+CR;
4. Ideal working temperature: -25 to 80C;
5. Safety factor: 3:1
6. NOTE: ID 900mm & 1200mm, Other parameters are by your requirements.

The hoses will be suitable for use with liquefied petroleum gases and liquefied natural gases.

Features:

1. Tube: smooth, UHMWPE and EPDM synthetic rubber;
2. Reinforcement: High tensile textile cord with helix steel wire;
3. Cover: wrapped finish, rubber compound, weather and abrasion resistant.
4. Temperatures: : -40°C~120°C
5. Safety factor: 3:1
6. NOTE: Other parameters are by your requirements.

A general purpose mandrel built air hose, engineered for medium to heavy duty application;lts strong yet flexible construction guarantees a long life and easy handling.

Features:

1. Tube: Black, SBR compound synthetic rubber.
2. Reinforcement: High tensile textile cord with helix steel wire;
3. Cover: Black, wrapped finish, SBR rubber, weather and abrasion resistant.
4. Temperature Available From -20 °С to 80 °С
5. Safety factor: 3:1
6. Reference Standard GB118692

Hot water hose suitable for many applications in automobile industry, cleaning equipment,cooling systems.

Features:

1. Трубка: черная, синтетическая резина/каучук EPDM.
2. Армирование: высокопрочный текстильный шнур со спиральной стальной проволокой;
3. Покрытие: черный, с покрытием, резиновый EPDM, устойчивый к атмосферным воздействиям и истиранию.
4. Доступная температура от -20 °С до 150 °С
5. Коэффициент безопасности: 3:1
6. Эталонный стандарт GB118692
7. ПРИМЕЧАНИЕ: другие параметры по вашим требованиям.

Designed for full suction and discharge pressure; It handles sewage, waste water, etc.

Features:

1. Tube: Black, SBR compound synthetic rubber.
2. Reinforcement: High tensile textile cord with helix steel wire;
3. Cover: Black, wrapped finish, SBR rubber, weather and abrasion resistant.
4. Temperature Available From -20 °С to 80 °С
5. Reference Standard HG/T3035-1999
6. Safety factor: 3:1
7. Color Black or as your order
8. NOTE: Other parameters are by your requirements. 

A light weight suction and discharge hose specially designed for use on hydraulic system , also used for suction and discharge of various petroleum products with maximum 20% aromatic content.

Features:

1. Tube: Black, NBR compound synthetic rubber.
2. Reinforcement: 2 Plies High tensile textile cord;
3. Cover: finish, Black , wrapped finish, CR(neoprene), weather resistant.
4. Temperature Available From -40 °С to 100 °С
5. Safety factor: 3:1
6. NOTE: Other parameters are by your requirements. 

A light weight suction and discharge hose specially designed for use on hydraulic system; also used for suction and discharge of various petroleum products with maximum 20% aromatic content.

Features:

1. Tube: Black, NBR compound synthetic rubber.
2. Reinforcement: 1 Plies High tensile textile cord;
3. Cover: Black, wrapped finish, CR (neoprene), weather resistant.
4. Temperature Available From -40 °С to 100 °С
5. Safety factor: 3:1
6. NOTE: Other parameters are by your requirements.